查看: 1090|回复: 15
|
standard VGA driver needed wXP
[复制链接]
|
|
本帖最后由 (^.^) 于 18-5-2010 05:03 PM 编辑
请问各位大大一个小问题。
我的graphic card 一直有问题,说什么atiavg2 error 之类的东西。
我就delete我的graphic card 的 driver,打算重新reinstall.
但是我reinstall时,系统就跳出这个信息:system was able to complete this installation.try to setup your adaper and Q with a standard VGA driver before runnning setup.
感激不尽 |
|
|
|
|
|
|
|
发表于 18-5-2010 06:05 PM
|
显示全部楼层
用网路搜索一个软件叫Driver Sweeper然后开机按F8进入Safe Mode之后执行它将ATI显示卡相关驱动资料给勾选Delete掉然后Restart之后从装你的Driver |
|
|
|
|
|
|
|
楼主 |
发表于 18-5-2010 09:09 PM
|
显示全部楼层
大大~
我试过了,有一个文件我洗不掉ati2evxx.dll
然后我重装driver,也是出现同样的信息哦 |
|
|
|
|
|
|
|
发表于 19-5-2010 09:50 PM
|
显示全部楼层
你有没有到开机到Safe Mode那里Uninstall? 一般上用Driver Sweeper在Safe Mode就能将系统使用者的Driver残留除掉,之后你才回Windows手动安装驱动,若不幸的话报上你使用的显示卡名字上来 |
|
|
|
|
|
|
|
楼主 |
发表于 20-5-2010 12:34 AM
|
显示全部楼层
你有没有到开机到Safe Mode那里Uninstall? 一般上用Driver Sweeper在Safe Mode就能将系统使用者的Driver残留 ...
Essential 发表于 19-5-2010 20:50
有啊,开到Safe Mode那里Uninstall的。试了很多次,那个文件怎么都洗不掉
=(
我的是ATI redeon 9550...windows xp... |
|
|
|
|
|
|
|
楼主 |
发表于 20-5-2010 01:36 AM
|
显示全部楼层
|
|
|
|
|
|
|
发表于 20-5-2010 03:11 AM
|
显示全部楼层
本帖最后由 Essential 于 20-5-2010 03:12 AM 编辑
试试去ATI网站下载ATI新的驱动,然后看看能否安装,若还是不能就使用手动,方法如下:
1. 按Start然后Right Click你的My Computer之后Properties, 然后System Properties画面会弹出
2. 按System Properties画面的Hardware然后到Device Manager
3. 寻找Stadard VGA Adapter之后Right Click然后Properties到Driver选择Update Driver之后Hardware Update Wizard会弹出
4. 选择No, not this time然后按Next之后点选Install From list or specified Location (Advanced), 按Next选择Don'tsearch,I will choose the driver to install然后按Next,之后选择Have Disk然后Browse, 之后从Look in去选择C:\你会看到ATI资料夹,之后Double Click它会带你到Support再double Click它带你到xx-xx_legacy_xp32-64_dd_ccc的资料夹再Double Click你会看到Bin, CCC和Driver三个资料夹,就Double Click Driver资料夹然后Double Click那个XP_INF然后那个INF档会自动被选,你按Open就会回到Install From Disk画面,按OK然后如果Windows能判断你的显示卡就会直接停留在Redeon 9550你只需按OK进行安装即可,然后完成了Restart电脑
注: xx-xx_legacy_xp32-64_dd_ccc资料夹的前面的XX-XX是驱动版本而异,比如该版本的驱动是10.4就会是10-04如此推类,所以不必理会 |
|
|
|
|
|
|
|
楼主 |
发表于 21-5-2010 01:22 AM
|
显示全部楼层
. 选择No, not this time然后按Next之后点选Install From list or specified Location (Advanced), 按Next选择Don'tsearch,I will choose the driver to install然后按Next,之后选择Have Disk然后Browse, 之后从Look in去选择C:\你会看到ATI资料夹,之后Double Click它会带你到Support再double Click它带你到xx-xx_legacy_xp32-64_dd_ccc的资料夹再Double Click你会看到Bin, CCC和Driver三个资料夹,就Double Click Driver资料夹然后Double Click那个XP_INF然后那个INF档会自动被选,你按Open就会回到Install From Disk画面,按OK然后如果Windows能判断你的显示卡就会直接停留在Redeon 955
到这里的时候,系统说this driver is not digitally signed
不管它,照按next
系统说the software you are installing for this hardware.
ATI Redeon 9550 / x1050 series
has not passed windows logo testing to verify it's compatibility with windeows XP.
continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future.,Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed windows logo testing
=(
不管它,照按 continue anyway
最后
Cannot install this hardware
there was a problem installing this hardware
ATI Radeon 9550/x1050 series
an error occurred during the installation of the device.
The system cannot find the file specified. |
|
|
|
|
|
|
|
发表于 21-5-2010 02:01 AM
|
显示全部楼层
|
|
|
|
|
|
|
发表于 21-5-2010 05:21 PM
|
显示全部楼层
有啊,开到Safe Mode那里Uninstall的。试了很多次,那个文件怎么都洗不掉
=(
我的是ATI redeon 9550.. ...
nasilemak_ms 发表于 20-5-2010 12:34 AM
XP Service Pack 多少的? |
|
|
|
|
|
|
|
楼主 |
发表于 25-5-2010 12:17 AM
|
显示全部楼层
首先去将你电脑整个C:\ATI的资料夹Delete掉,然后在按以下连接下载10.2然后安装
一般是若是不能成功 ...
Essential 发表于 21-5-2010 01:01
还是不能的。。。 |
|
|
|
|
|
|
|
楼主 |
发表于 25-5-2010 12:18 AM
|
显示全部楼层
XP Service Pack 多少的?
dino6820 发表于 21-5-2010 16:21
2的,有关系吗? |
|
|
|
|
|
|
|
发表于 25-5-2010 01:25 AM
|
显示全部楼层
|
|
|
|
|
|
|
发表于 25-5-2010 09:21 AM
|
显示全部楼层
2的,有关系吗?
nasilemak_ms 发表于 25-5-2010 12:18 AM
也会有关系的 |
|
|
|
|
|
|
|
楼主 |
发表于 26-5-2010 08:09 AM
|
显示全部楼层
还是不能有可能就是你自己的显示卡出现了异常问题
Essential 发表于 25-5-2010 00:25
how to know leh? |
|
|
|
|
|
|
|
楼主 |
发表于 26-5-2010 08:11 AM
|
显示全部楼层
也会有关系的
dino6820 发表于 25-5-2010 08:21
那我应该怎样做? |
|
|
|
|
|
|
| |
本周最热论坛帖子
|