佳礼资讯网

 找回密码
 注册

ADVERTISEMENT

楼主: DemonMaster

买贵的Router,为什么?

[复制链接]
发表于 5-12-2016 11:33 PM | 显示全部楼层
本帖最后由 闪电侠 于 6-12-2016 01:38 AM 编辑
delaciox 发表于 5-12-2016 11:24 PM
我的是没有这个的, 、
越简单越好, 减少当机的问题

说真的,openwrt只能当作学习而已,
一般使用的话,用原厂的firmware就足够了







回复

使用道具 举报


ADVERTISEMENT

发表于 6-12-2016 11:40 AM | 显示全部楼层
闪电侠 发表于 5-12-2016 11:33 PM
说真的,openwrt只能当作学习而已,
一般使用的话,用原厂的firmware就足够了

我的是原厂没有VLAN tag,才刷固件的
回复

使用道具 举报

发表于 7-12-2016 12:39 AM | 显示全部楼层
delaciox 发表于 6-12-2016 11:40 AM
我的是原厂没有VLAN tag,才刷固件的

话说你的QOS 是怎样设置的?
我这里没有这个选项?
用ssh也叫不出这个设定。。


回复

使用道具 举报

发表于 7-12-2016 08:02 PM | 显示全部楼层
闪电侠 发表于 7-12-2016 12:39 AM
话说你的QOS 是怎样设置的?
我这里没有这个选项?
用ssh也叫不出这个设定。。

英文教程
Manage Your Network Traffic Priority in OpenWrt with QoS
QoS or Quality of Service is equivalent to traffic shaping but with packet prioritization, application classification and queuing at congestion points
With QoS on OpenWrt you can prioritize network traffic selected by the addresses, ports or services.
QoS advantages
  • Guarantees bandwidth for key applications and users.
  • Can put off the need for faster network infrastructure.
  • Can help in network planning by measuring and managing traffic flow.
Installation And Configuration
Step 1. Install QoS Packages on OpenWRT from LuCI Interfaces
  • Select tabs System – Software
  • Click Update List
  • In Download and install packages type “luci-app-qos” then click ok

Step 2. Configuration
  • Select tabs Network – QoS
  • Check Enable , Check Calculate Overhead (To reduce traffic latency)
  • In Download speed and Upload speed column by Speedtest then convert it to kbit/s (Calculation tools)

Step 3. Classification Rules
  • Classification Rules is the application or packet priority rules for the network traffic
  • Enter the port and protocol of the application (e.g. SSH : 22 , DNS : 53 , Web Services : 80)
  • Then select protocol : (e.g. TCP , UDP , ICMP , or ALL)
The QoS Priority
Priority – boosts low-bandwidth small frames, such as TCP-ACKs and DNS more than the Express
Express – is for prioritizing bigger frames, which would include stuff like VoIP and Gaming
Normal – all traffic that is not specifically classed will fall under the normal class. You should not need to explicitly set anything to this class
Low – is only allocated bandwidth when the remaining classes are idle. Use this class for P2P services and downloading services like FTP

Step 4. Start and enable QoS
  • Select tabs System – Startup
  • Find in initscript – QoS
  • Click enabled and start
Setup the QoS can take a time because it’s not simple like Wshaper, Because QoS need additional configuration like classify your network bottleneck and traffic to optimize the network efficiently
Notes
  • You can change some PC Priority Add Static IP (Network – DHCP – Static Leases) then Source Host the PC IP , Destination Host all
  • You can search the application port from Google’s search (e.g. Steam required ports, Google Play store port number, PS4 port numbers, and Netflix Port Number)
  • If you need some application or services run smoothly change the port number of the application to Express or Priority
  • If QoS doesn’t work try reducing Upload speed to 80% and slightly reduce the Download Speed to calibrate the settings
  • To optimize your Internet Traffic don’t use Qos with Wshaper for optimal performance


评分

参与人数 1人气 +5 收起 理由
闪电侠 + 5 精品文章

查看全部评分

回复

使用道具 举报

发表于 7-12-2016 08:21 PM | 显示全部楼层
delaciox 发表于 6-12-2016 11:40 AM
我的是原厂没有VLAN tag,才刷固件的

找到了,要install  luci-app-qos 才行
是不是加了dota2的udp port 然后set成priority就行了呢?












回复

使用道具 举报

发表于 7-12-2016 08:34 PM | 显示全部楼层
闪电侠 发表于 7-12-2016 08:21 PM
找到了,要install  luci-app-qos 才行
是不是加了dota2的udp port 然后set成priority就行了呢?

aaaaaa.PNG

dota2 的是27005那个
gta5 的是6672那个

评分

参与人数 1人气 +5 收起 理由
闪电侠 + 5 谢谢分享

查看全部评分

回复

使用道具 举报

Follow Us
发表于 7-12-2016 08:50 PM | 显示全部楼层
delaciox 发表于 7-12-2016 08:34 PM
dota2 的是27005那个
gta5 的是6672那个

为啥你的download speed 才放7468呢?  才7mbit/s 而已? maxis fibre 最低不是10 mbps 吗?
回复

使用道具 举报

发表于 7-12-2016 09:05 PM | 显示全部楼层
闪电侠 发表于 7-12-2016 08:50 PM
为啥你的download speed 才放7468呢?  才7mbit/s 而已? maxis fibre 最低不是10 mbps 吗?

如果用超过100%网速,一些看戏的就会波及到游戏导致lag。我测试这样放就不会波及lag到厉害。

然后上载限制跑3mbps,就是300kib/s
回复

使用道具 举报


ADVERTISEMENT

发表于 7-12-2016 09:18 PM | 显示全部楼层
delaciox 发表于 7-12-2016 09:05 PM
如果用超过100%网速,一些看戏的就会波及到游戏导致lag。我测试这样放就不会波及lag到厉害。

然后上载限制跑3mbps,就是300kib/s

可是你下载东西就不会达1mb/s 满速了?


你把steam 的port加进了qos,你玩dota,别架电脑在看戏 (youtube,iflix...) 不是不会kacau到你吗?
因为qos不是优先处理有设置的udp port?



回复

使用道具 举报

发表于 7-12-2016 09:41 PM | 显示全部楼层
闪电侠 发表于 7-12-2016 09:18 PM
可是你下载东西就不会达1mb/s 满速了?


你把steam 的port加进了qos,你玩dota,别架电脑在看戏 (youtube,iflix...) 不是不会kacau到你吗?
因为qos不是优先处理有设置的udp port?

steam不用加,主要是游戏的。你去试看就知道的。 我都不用满速的拿来做预留25%的
回复

使用道具 举报

发表于 7-12-2016 10:07 PM | 显示全部楼层
本帖最后由 闪电侠 于 7-12-2016 10:08 PM 编辑
delaciox 发表于 7-12-2016 09:41 PM
steam不用加,主要是游戏的。你去试看就知道的。 我都不用满速的拿来做预留25%的

好的,我自己再试试看

(我指的steam 是dota2啊  https://support.steampowered.com ... GLVN-8711&l=english
回复

使用道具 举报

发表于 7-12-2016 10:18 PM | 显示全部楼层
闪电侠 发表于 7-12-2016 10:07 PM
好的,我自己再试试看

(我指的steam 是dota2啊  https://support.steampowered.com ... GLVN-8711&l=english)

dota2 dev那边写的
What protocol and ports does Dota 2 use?
Dota 2 uses the UDP protocol and communicates on ports 27015 through 28999 to our dedicated servers. By default, your client opens UDP port 27005 or your computer to connect to the game servers.
回复

使用道具 举报

发表于 7-12-2016 10:32 PM | 显示全部楼层
本帖最后由 闪电侠 于 7-12-2016 10:35 PM 编辑
delaciox 发表于 7-12-2016 10:18 PM
dota2 dev那边写的
What protocol and ports does Dota 2 use?
Dota 2 uses the UDP protocol and communicates on ports 27015 through 28999 to our dedicated servers. By default, your client opens UDP po ...

我查过了,steam里所有的游戏 UDP port是一样的哦
回复

使用道具 举报

发表于 7-12-2016 11:06 PM | 显示全部楼层
本帖最后由 delaciox 于 7-12-2016 11:08 PM 编辑
闪电侠 发表于 7-12-2016 10:32 PM
我查过了,steam里所有的游戏 UDP port是一样的哦

steam的里port多数一样是给valve server游戏而已, 另外的gta5, cod 很多都是不一样

评分

参与人数 1人气 +3 收起 理由
闪电侠 + 3 我很赞同

查看全部评分

回复

使用道具 举报

发表于 9-12-2016 10:57 PM | 显示全部楼层
本帖最后由 闪电侠 于 9-12-2016 11:00 PM 编辑
delaciox 发表于 7-12-2016 11:06 PM
steam的里port多数一样是给valve server游戏而已, 另外的gta5, cod 很多都是不一样

openwrt真的很不错,有排我玩

真的学到不少东西,也了解到什么是telnet,ssh...

现在还会用VI edit command 了,而且从中学习了关于linux

linux里 firewall 的iptable和openwrt 通用,那个功能真的强大到我无话可说,总之什么都可以修改,无所不能~
(终于明白为什么那么多超级服务器都在跑linux了)











回复

使用道具 举报

发表于 9-12-2016 11:19 PM | 显示全部楼层
闪电侠 发表于 9-12-2016 10:57 PM
openwrt真的很不错,有排我玩

真的学到不少东西,也了解到什么是telnet,ssh...

现在还会用VI edit command 了,而且从中学习了关于linux

linux里 firewall 的iptable和openwrt 通用,那个 ...

hdd的partition type,linux的是ext3或ext4,然后又不用去defrag, 反而windows的ntfs exfat 的要去defragment


回复

使用道具 举报


ADVERTISEMENT

发表于 18-1-2017 06:43 PM | 显示全部楼层
delaciox 发表于 3-11-2016 12:07 AM
Openwrt设置QOS也简单, 开可以把torrent,emula放最低排程,不去影响别的更高排程,然后再固定游戏的UDP port放到最优先。

我弄dota2和GTA5最优先的,其他的放普通。我妹妹玩MAT的但是我没有设置下去,我玩就 ...

前辈,有什么modem介绍?

Asus DSL N12HP, 这个ok吗?

主要是要玩游戏顺。

本人用streamyx 8mbps。

谢谢!
回复

使用道具 举报

发表于 19-1-2017 01:27 PM | 显示全部楼层
如果是streamyx就别浪费钱买贵modem了。Asus DSL-N12系列那种就已经很足够。
如果是unifi就推荐买贵一点的router。最好是有Gigabit的那种。像ASUS RT-AC以上等级RM500+的router。
我家unifi现在就用着ASUS RT-AC55UHP, 买了RM500+。很稳但是不喜欢antenna太长。所以我再买一个ASUS RT-N12给他对换。
因为我的unifi是拉去楼上,楼上wifi只照到楼上而已,用这么长的antenna比较不适合。所以我就对换,我RT-N12的router是用来做Access Point,所以装在楼下客厅。
那两条长的antenna 换过去就漂亮。楼上和楼下都可上网。手机wifi signal保持Excellent。
回复

使用道具 举报

发表于 24-1-2017 06:14 PM | 显示全部楼层
l.s.chu 发表于 18-1-2017 06:43 PM
前辈,有什么modem介绍?

Asus DSL N12HP, 这个ok吗?

主要是要玩游戏顺。

本人用streamyx 8mbps。

谢谢!

Asuswrt 的QOS做得很不错,设置也很简单,把游戏的udp或tcp port加进去QOS后,任何人都不能阻止你玩游戏了  一个字 “顺”!
回复

使用道具 举报

发表于 25-1-2017 08:46 AM | 显示全部楼层
闪电侠 发表于 24-1-2017 06:14 PM
Asuswrt 的QOS做得很不错,设置也很简单,把游戏的udp或tcp port加进去QOS后,任何人都不能阻止你玩游戏了  一个字 “顺”!

怎么加 udp或tcp port?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

 

ADVERTISEMENT



ADVERTISEMENT



ADVERTISEMENT

ADVERTISEMENT


版权所有 © 1996-2023 Cari Internet Sdn Bhd (483575-W)|IPSERVERONE 提供云主机|广告刊登|关于我们|私隐权|免控|投诉|联络|脸书|佳礼资讯网

GMT+8, 29-3-2024 02:06 AM , Processed in 0.077696 second(s), 33 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表